- Made in USA
- The highest quality exterior vinyl shutters available
- Superior shutter arch injection mold engineering
- "Raised" panel shutter transom styling
- Specially made for 14 5/8" Mastic vinyl shutters
- 100% high-density copolymer arch construction
- Baked-on acrylic finish
- UV stabilized for superior fade resistance
- All colors are paintable
- Architecturally correct - looks like real wood
- Will not rot, crack, split, or mold
- Textured wood-grain finish
- Lightweight and easy to handle
- Easy installation on any surface
- Low-maintenance permanent installation
- Touch-up paint also available
- Transferable lifetime warranty
The Mastic raised panel shutter transom tops are made to fit 10 or 11 inch transom windows, but will work with virtually any window. Simply clip them to the top of your Mastic vinyl exterior shutters and fasten them to the wall using the included mounting hardware. Once they are fastened to the shutters, they look like a single piece shutter next to your window.
- 2 shutter transom tops
- 12 shutterplugs
- 12 painted steel screws
- 4 joining clips
- Installation instructions
- Painting and care instructions
Important Measurement Information
The height of the vinyl exterior shutters you order with these transom shutter tops should be 13 inches less than the window measurement.
To obtain the window measurement for rectangular windows, measure from the top of the window to the bottom of the window including the window trim. Subtracting 13 inches from this measurement will give you the correct size of exterior shutters to order for this transom shutter top.
For example, if you measure your window and it is 61" in height, the size of exterior vinyl shutters you order for these transom tops should be 48" (61 - 13 = 48).
Remember - measure twice and order once!
This raised panel shutter transom top is only compatible with the following Mastic™ vinyl shutters when they are ordered in 14 5/8" widths. Use of this product with any other exterior window shutters is not recommended.
|Mastic Standard Shutters|
|Mastic Custom Shutters|
|Depth (Thickness)||Approximately 1 1/8"|
|Core||Hollow (open back)|
|Paint Required||None; however all colors can be painted with standard outdoor paints|
NOTE: Please do not rely on the colors that
are displayed on the screen. To get an exact color match, we strongly recommend
before placing your
order for vinyl shutter transom tops.
Frequently Asked Questions
- How do I remove the Shutterplugs from the vinyl shutters once they are in place?
Slide a chisel behind the vinyl shutter until it comes in contact with the Shutterplug. Make sure to keep the sharp edge of the chisel away from the wall. Give the chisel a sharp tap with a hammer and it will cut through the Shutterplug. After the shutter is removed, shear the remaining part of the Shutterplug flush with the surface and bore out the shank with a drill. Fill the hole with silicone to weatherproof. See our Vinyl Shutter Removal Instructions for additional information.
- My exterior wall is uneven. How do I install my exterior vinyl shutters?
You can use ferrules (a short cylindrical pipe) as standoffs to keep your vinyl shutters stable. Simply paint them, trim to size, and mount them behind your exterior shutters. Do not to put wood blocks behind the vinyl exterior shutters because they will rot fairly quickly.
Video About Vinyl Window Shutters
|In this 90-second video, host Tim Carter describes some of the advantages of
exterior vinyl shutters over wood shutters. He also demonstrates just how easy it can be to
install vinyl shutters yourself. Click anywhere within the box below to begin the video.|
Transom Shutters, Decorative Shutters, External Plastic Shutters, Shutter Top Add-ons, Vinyl Raised Panel Shutters with 3 Sections, Vinyl Shutter Transom Top Price, Outside Shutters, Weatherproof Vinyl Shutters, Exterior Window Shutters, Transom Window Shutters, Window Shutter Extensions, Kicker Window Shutters, Custom Shutters, Vinyl Shutters Transom, Shutter Tops, Shutter Crown, Outer Shutters, Tops for Plastic Shutters