* * * Board and Batten Shutters 55" and larger will have 3 Cross-Battens * * *
- Made in USA
- The world's best-selling exterior shutters
- "Joined" board and batten shutter styling
- Premade and ready for shipment
- 100% vinyl one-piece shutter construction
- Molded-through color or paintable available
- Textured wood-grain finish
- Will not rot, crack, split, or mold
- Lightweight and easy to handle
- Easy installation on any surface
- Maintenance-free permanent installation
- Mix & match with custom shutters
- Lifetime limited transferable shutter warranty
- No assembly required
- Shutter mounting hardware included
Mid-America's standard-size Master Shutter® line is a great way to make decorating your home economical. Standard vinyl shutters are premade and injection-molded in one piece. While this means you won't have as many options as with custom shutters, the cost savings is significant.
Style MJ Master joined board and batten shutters are similar to the J4 style custom board and batten shutters
. You can even mix and match them to save money on the windows that standard shutters will fit on. Standard board and batten vinyl shutters are 14" wide and they are available in heights of 31", 35", 39", 43", 47", 51", 55", 59", 63", 67", 71", 75", and 80".
With 16 permanent molded-through colors and one paintable type of vinyl available, you have the flexibility to match virtually any home's trim colors. Standard sized board and batten shutters come complete with color-coordinated painted mounting screws. And you can add decorative shutter hinges for the perfect finishing touch.
Mid-America standard vinyl shutters are injection-molded in one piece at the Mid-America central factory. There are no joints that can come apart. This is the primary reason why only certain sizes are available - it would not be financially viable to build a mold in every conceivable shutter size.
The shutters are then placed in a warehouse where they are inventoried until they are ordered. This is why standard sized shutters are often referred to as "stock shutters", "premade shutters", or "one piece shutters".
|7/8" at the vertical boards|
|1 3/4" at the horizontal cross-battens|
|Vertical Board Width||Approximately 3 1/2"|
|Cross-Batten Height||Approximately 3 1/2"|
|Core||Hollow (open back)|
|Joints||None (single piece construction)|
|Mounting Options||Decorative only (fixed open position)|
|Molded-through Material||Fade resistant vinyl (duraprene)|
|Paintable Material (color #030)||Polypropylene (styrene)|
|Paint Required (color #030)||Latex-based outdoor flat or semi-gloss|
|Primer Required (color #030)|
||An inexpensive primer recommended|
NOTE: Please do not rely on the colors that
are displayed on the screen. To get an exact color match, we strongly recommend
before placing your
order for vinyl board and batten shutters.
If you would like to paint the shutters, order color #030 Paintable. None of the other Mid-America
colored vinyl shutters are paintable and attempting to do so will void the product warranty.
Frequently Asked Questions
- What are the advantages of vinyl shutters over wood shutters?
The color-through molded vinyl shutters are easy to install, easy to clean, do not warp, crack, fade, peel, split, or rot. Exterior vinyl shutters also provide better resilience than wood shutters under harsh conditions, such as near the ocean or in areas that receive heavy rainfall.
- Do I have to assemble the board and batten shutters?
When ordering from ShutterContractor.com, all of our exterior vinyl shutters come fully assembled and sonically welded. There is no assembly required. This is not true when ordering from many other exterior shutter outlets.
- How do I remove the Shutter-Loks from the vinyl shutters once they are in place?
Slide a chisel behind the shutter until it comes in contact with the Shutter-Lok. Make sure to keep the sharp edge of the chisel away from the wall. Give the chisel a sharp tap with a hammer and it will cut through the Shutter-Lok. After the shutter is removed, shear the remaining part of the Shutter-Lok flush with the surface and bore out the shank with a drill. Fill the hole with silicone to weatherproof. See our Vinyl Shutter Removal Instructions for additional information.
- My exterior wall is uneven. How do I install my exterior vinyl shutters?
You can use ferrules (a short cylindrical pipe) as standoffs to keep your vinyl shutters stable. Simply paint them, trim to size, and mount them behind your exterior shutters. Do not to put wood blocks behind the vinyl exterior shutters because they will rot fairly quickly.
Video About Vinyl Window Shutters
|In this 90-second video, host Tim Carter describes some of the advantages of
exterior vinyl shutters over wood shutters. He also demonstrates just how easy it can be to
install vinyl shutters yourself. Click anywhere within the box below to begin the video.|
Shutters Board and Batten Plastic, Cheap Board and Batten Shutters, Brand New Vinyl Shutters, Shutters on House Exterior, Board and Batten Vinyl Shutters, Polyvinyl Chloride Shutters, Outer Surface Shutters, Closed Board and Batten Window Shutters, Single Piece Shutters, Cottage Style Shutters, Architectural Shutter, Green Vinyl Shutters, Depot Shutters for Home, Polyurethane Shutters, Shutters Stone House, Stock Shutters, Pre-made Vinyl Shutters