Click on image for a larger view
|No screwing, nailing, bolting, or drilling to your home's exterior! The Quick Shutter Clamping System is a revolutionary way to board up your windows. Simply measure, cut plywood to size, screw the clamps to the plywood, and attach to your window casing.
Rather than waiting days to weeks for custom hurricane shutters, the quick shutter clamping system ships quickly and can be installed in just minutes. There is no reason why your home should be left unprotected during the next hurricane!
|Ships Out in 3 - 5 Business Days
- No damage your home's exterior
- Single person installation
- Storm protection in just minutes
- Cost effective hurricane shutter solution
- Reusable for years to come
- Easy to remove
- Fits inside of window frame - eliminating plywood waste
- Lightweight and easy to handle
- Tested to meet Florida building code tests ASTM E 330 and ASTM E 1996/1886
The Quick Shutter Clamping System was designed to make boarding your windows easy in the event of a hurricane or other inclament weather. Quicker, easier and less expensive than ordering hurricane shutters, and at the same time not ruining the exterior of your home!
The Quick Shutter Clamping System uses force and friction. A rotating cam pushes a rubber bumper against the interior of the window frame and the pressure against the frame keeps the plywood in place. The system has been tested to meet both Florida building codes ASTM E 330 and ASTM E 1996/1886.
The best part is they can be installed by 1 person in just minutes. There is no need to call all of your neighbors to help you board up your windows.
- 2 bottom bumbers
- 2 top clamps (cam driven)
- 2 cotter pins
- All necessary screws
- Installation instructions
|Materials||Steel and rubber|
|Maximum Opening Size||15 square feet (additional clamps required for larger window openings)|
|Minimum Opening Recess||2" inside of window casing|
|Country of Origin||China|
Frequently Asked Questions
- Has the Quick Shutter Clamping System been tested?
Yes. The product has been tested on two separate occasions by a facility certified by the State of Florida.
- Can the clamps be used over again?
Yes. They are designed for multiple years of use.
- Can I reuse the boards?
Yes. We recommend numbering the boards to match the proper window and treating the wood with paint or wood sealer to help prevent rot and store flat to prevent warping. Before every hurricane season, you should double check the fit in case adjustments need to be made.
Video: Introducing the Quick Shutter Clamping System
In 60 seconds, see how easy it is to protect your home using the Quick Shutter Clamping System.
Click anywhere in the box below to begin the video.
Hurricane Shutters, Board-up Windows, Severe Weather Protection for Windows, Shutter Clamp, Quick Shutter Clamping System, Hurricane Protection, Storm Shutters, Shutters for High Winds
|Did You Know...
Window shutters were originally created as window covers to literally "shut out" the sun, wind,
and cold because hand blown glass was too expensive and fragile for the common person to afford.
Most of those first shutters were latched on the inside and opened into the home's
interior. Over time glass became more widely available and the shutters were redesigned for the
exterior of the house to protect the glass which was still relatively expensive.